Function key Function
change Open the "Define operation screen" menu.
You can find more detailed information in the "Defining operation screens" sec‐
tion.
Diag. Opens the"Fault memory/alarm memory" menu.
In this menu, the queue of active faults and alarms is displayed. You can find
further information on alarms and faults in the "Alarms and faults" section.
You can select the following fault and alarm menus.
Current faults
This menu shows the number and title of the currently active faults.
1. Press the <Help> function key to fetch information about correcting the fault.
2.
Press the <Ack.> function key to acknowledge the fault.
Current alarms
This menu shows the number and title of the currently active alarms.
1. Press the <Help> function key to fetch information about correcting the alarm.
Old faults
This menu displays the number and titles of the old faults. The top row shows the following
information.
● The total number of faults.
● The time when the fault occurred.
The faults are displayed in ascending order in separate screens.
1. Press the<Tools+> key. Select "older" or "newer" to fetch the fault messages arranged
chronologically.
2. Press the <Help> function key to fetch information about correcting the fault.
Old alarms
This menu displays the number and titles of the old alarms. The top row shows the following
information:
● The total number of alarms.
● The time when the alarm occurred.
The alarms are displayed in ascending order in separate screens.
1. Press the<Tools+> key. Select "older" or "newer" to fetch the alarms arranged
chronologically.
2. Press the <Help> function key to fetch information about correcting the alarm.
Operation
8.3 Operation via the AOP30 operator panel
SINAMICS GM150 6SL3810-2LN31-8AA2
118 Operating Instructions Rev.201910281332 EXAMPLE
To Next Page
Loading...
