Communication via PROFINET IO
5.7 PROFINET with 2 controllers
Communication
142 Function Manual, 12/2018, 6SL3097-5BD00-0BP0
Example: 2 controllers in a common project
Start STEP 7:
1. Under S7, create an automation controller for the new project, in the example called A-
CPU, based on a SIMATIC 300.
Figure 5-6 Creating a new S7 project
2. In HW Config, select the controller CPU 315-2 PN/DP and connect the PROFINET IO as
a communication network.
3. Select an S120 drive from the object manager (in the example, a CU320-2 PN).
Figure 5-7 Automation controller created in HW Config
To Next Page
Loading...
