System
8.5 SYSTEM - "PLC" softkeys
Cylindrical grinding
138 Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Modem
If the data transfer is performed on the RS232 interface via modem, start with the following
initialization option:
Figure 8-35 Initialize the modem
The following initializations are possible via toggle fields:
● Baud rate
9600 / 19200 / 38400 / 57600 / 115200.
● Parity:
"without" for 10 bit
"odd" for 11 bit
Using the "Modem settings" softkey you can make the following additional settings for a
connection that does not yet exist:
Figure 8-36 Modem settings
To Next Page
Loading...
Need help?
General
