Siemens SINUMERIK 802D

System
8.3 SYSTEM - "Machine data" softkeys
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
113
8.3 SYSTEM - "Machine data" softkeys
References
You will find a description of the machine data in the following manufacturers´ documents:
SINUMERIK 802D sl List Manual
SINUMERIK 802D sl Function Manual for turning, milling, nibbling
Machine data
Any changes in the machine data have a substantial influence on the machine.
Figure 8-6 Structure of a machine data line
Table 8- 1 Legend
No. Significance
1 MD number
2 Name
3 Value
4 Unit
so immediately effective
cf with confirmation
re Reset
5 Effective
po Power on
CAUTION
Incorrect parameterization may result in destruction of the machine!
The machine data are divided into the groups described in the following.
0DFKLQH
GDWD