Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
359
PLC diagnostics
13
Functionality
A PLC user program consists to a large degree of logical operations to realize safety
functions and to support process sequences. These logical operations include the linking of
various contacts and relays. As a rule, the failure of a single contact or relay results in a
failure of the whole system/installation.
To locate causes of faults/failures or of a program error, various diagnostic functions are
offered in the "System" operating area.
Operating sequence
Press the "PLC" softkey in the <SYSTEM> operating area.
Press "PLC program".
The project stored in the residual memory is opened.
$/$50
6<67(0
î
3/&
3/&î
SURJUDP
To Next Page
Loading...
