Siemens SINUMERIK 802D User Manual

Cycles
9.11 Oblique plunge-cutting – CYCLE413
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
189
F_KS (feedrate for air grinding)
With an air grinding feedrate, the path between the starting point and the point where the
wheel comes into contact with the workpiece (with the aid of the acoustic emission sensor) is
traversed.
UWERK
Use the UWERK parameter to specify the peripheral speed of the workpiece in m/min.

Siemens SINUMERIK 802D Specifications

General

Brand	Siemens
Model	SINUMERIK 802D
Category	Control Unit
Language	English