Siemens SINUMERIK 802D User Manual

Turning on, reference point approach
3.1 Turning On and Reference Point Approach
Cylindrical grinding
34 Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Press the arrow keys.
If you select the wrong approach direction, no motion is carried out.
Approach the reference points for each axis one after the other.
You can exit the function by selecting another operating mode ("JOG", "MDA" or
"Automatic").
For the functions described below, select the "Jog" operating mode.
;
=

Siemens SINUMERIK 802D Specifications

General

Brand	Siemens
Model	SINUMERIK 802D
Category	Control Unit
Language	English