Siemens SINUMERIK 802D User Manual

Appendix
A.1 User data
Cylindrical grinding
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
379
Name Type Default
Value
Description
_GC_FWEG REAL Free wheel travel path (measurement control)
_GC_SEARCHS Tag for seat regrinding is evaluated by the cycles so that the
individual seat can be identified via a block search.
_GC_SEARCH Tag for seat regrinding is evaluated by the cycles so that the
individual seat can be identified via a block search.
_GC_SEARCHSET Tag for seat regrinding is evaluated by the cycles so that the axes
can be recalibrated.
_GC_SEACRHVALUE[
0..2]
Regrinding calibration values
_GC_SUGFEED Independent of basic system
0 = GWPS in m/s
1 = GWPS in feed/min
_GC_MF[18] Enable program level abort of CYCLE448
_GC_MF[19] Blocking and resetting of last program level abort
NOTICE
The values stored as the default must be checked by the machine manufacturer and
adapted to the realities of the machine.

Siemens SINUMERIK 802D Specifications

General

Brand	Siemens
Model	SINUMERIK 802D
Category	Control Unit
Language	English