Siemens SINUMERIK 808D ADVANCED

Parameter Manual
496 Operating Instructions, 08/2013, 6FC5397-8EP40-0BA0
TRACYL_ROT_AX_FRAME_1
MD 24805, 169
TRACYL_ROT_AX_OFFSET_1
MD 24800, 169
TRACYL_ROT_SIGN_IS_PLUS_1
MD 24810, 170
TRAFO_AXES_IN_1
MD 24110, 167
TRAFO_AXES_IN_2
MD 24210, 168
TRAFO_GEOAX_ASSIGN_TAB_1
MD 24120, 167
TRAFO_GEOAX_ASSIGN_TAB_2
MD 24220, 168
TRAFO_INCLUDES_TOOL_1
MD 24130, 168
TRAFO_INCLUDES_TOOL_2
MD 24230, 169
TRAFO_TYPE_1
MD 24100, 166
TRAFO_TYPE_2
MD 24200, 168
Transferred M and S functions, axis specific, 447
TRANSMIT_BASE_TOOL_1
MD 24920, 171
TRANSMIT_BASE_TOOL_2
MD 24970, 172
TRANSMIT_POLE_SIDE_FIX_1
MD 24911, 171
TRANSMIT_POLE_SIDE_FIX_2
MD 24961, 172
TRANSMIT_ROT_AX_FRAME_1
MD 24905, 170
TRANSMIT_ROT_AX_FRAME_2
MD 24955, 172
TRANSMIT_ROT_AX_OFFSET_1
MD 24900, 170
TRANSMIT_ROT_AX_OFFSET_2
MD 24950, 171
TRANSMIT_ROT_SIGN_IS_PLUS_1
MD 24910, 171
TRANSMIT_ROT_SIGN_IS_PLUS_2
MD 24960, 172
U
UPLOAD_CHANGES_ONLY
MD 11212, 64
UPLOAD_MD_CHANGES_ONLY
MD 11210, 63
USE_FIXPOINT_MANUAL_MA
MD 1099, 18