Siemens SINUMERIK 840D sl Programming Manual

A.2 Documentation overview
You will find extensive documentation on the functions of SINUMERIK 840D sl from version 4.8
SP4 at 840D sl documentation overview (https://support.industry.siemens.com/cs/ww/en/view/
109766213).
You can display the documents or download them in PDF or HTML5 format.
The documentation is divided into the following categories:
● User: Operating
● User: Programming
● Manufacturer/Service: Configure
● Manufacturer/Service: Commissioning
● Manufacturer/Service: Functions
● Safety Integrated
● SINUMERIK Integrate / MindApp
● Information and training
Appendix
A.2 Documentation overview
NC programming
1314 Programming Manual, 12/2019, 6FC5398-2EP40-0BA0

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based