Siemens SINUMERIK 840D Function Manual

Index
Basic logic functions: Feeds (V1)
72 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
MD12204, 45
MD12240, 55
MD20100, 14, 17
MD20150, 24, 26, 27, 55
MD20172, 6
MD20200, 47
MD20201, 47, 57
MD20650, 20
MD20750, 15
MD21200, 25
MD21220, 41
MD21230, 41
MD22140, 55
MD22410, 38
MD30300, 55
MD32000, 26
MD32040, 12
MD32050, 12
MD32060, 48
MD32300, 26, 49, 50
MD34990, 27
MD35140, 16, 18
Multiple feedrate values in one block, 40
N
Non-modal feedrate FB, 47
P
Parameter set
Servo, 49
Programmable end-of-motion criterion, 52
Programmable runin and runout paths, 19
Programmable servo parameter set
In the part program/synchronized action, 53
Programmable singleaxis dynamic response, 7, 48
R
Rapid traverse override switch, 33
Reference axis for G96, G961, G962, 13
Revolutional feedrate (G95), 11
IS revolutional feedrate active, 12
Run-in and run-out paths, programmable, 19
Run-up axes, 51
S
SD41100, 12
SD42010, 19, 20, 21
SD42100, 38, 39
SD42101, 39
SD42600, 12
SD43210, 16, 18
SD43220, 15
SD43300, 12
Servo parameter set, 49
Programmable, 53
Single axes, 48
Singleaxis dynamic response, 48
Singleaxis dynamic response?, 7
Spindle override factor, 36
Spindle speed limitation with G96, G961, 15
T
Types of feedrate, 5

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB