Siemens SINUMERIK 840D - Page 378

6
File Management 10.04
6.3 Pro
g
ram mana
g
ement with PCU 50
6
 Siemens AG, 2004. All rights reserved
6-378 SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
Renaming a
directory/program
 Open the Program Manager.
 Place the cursor on the directory/program that you want to
rename.
Rename
 Press the "Rename" softkey.
 Enter the name of the new directory or program in the "To:" field.
The name must be unique, i.e. two directories or programs are not
permitted to have the same name.
 Press the "OK" softkey.
The directory/program is renamed.
Moving a
directory/program
 Open the Program Manager.
 Place the cursor on the directory/program that you want to move.
Cut
 Press the "Cut" softkey and then the "OK" softkey.
The selected directory/program is deleted at this point and stored in
buffer memory.
 Select the directory level in which you want to insert the
directory/program.
Insert
 Press the "Insert" softkey.
The directory/program is moved to the selected directory level.
If a directory/program of the same name already exists in this
directory level, a prompt asks whether you want to overwrite or insert
it under a different name.
 Press the "OK" softkey if you want to overwrite the
directory/program.
-or-
 Enter another name if you want to insert the program/directory
under another name.
-and-
 Press the "OK" softkey.