Siemens SINUMERIK 840D Operation/Programming

8
Alarms and Messages 10.04
8.2 Alarms in Sho
p
Mill
8
 Siemens AG, 2004. All rights reserved
8-404 SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
8.2 Alarms in ShopMill
8.2.1 Overview of alarms
If errors are detected in ShopMill, the system generates an alarm and
aborts program execution, if necessary.
The text displayed with the alarm number provides an explanation of
the cause of the error.
Overview of alarms
100000-100999 Basic system
101000-101999 Diagnostics
102000-102999 Services
103000-103999 Machine
104000-104999 Parameters
105000-105999 Programming
106000-106999 Spare
107000-107999 OEM
110000-110999 reserved
111000-112999 ShopMill
120000-120999 reserved
Warning
Please check the situation in the plant on the basis of the description
of the active alarm(s). Eliminate the cause/s of the alarm/s and
acknowledge it/them as instructed. Failure to observe this warning will
place your machine, workpiece, stored settings and possibly even
your own safety at risk.
If you are working in CNC ISO mode, please refer to alarm
descriptions in the following manual:
References: /DA/, Diagnostics Guide SINUMERIK 840D/840Di/
810D

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB