Siemens SINUMERIK 840Di sl - Page 439

Tables
12.1 List of statements
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
439
Name Meaning Value Description,
comment
Syntax m/s
3
Group
2
CTABPERIOD
Returns the table periodicity with number n Parameter n
CTABPOL Number of polynomials already used in the
memory
memType
CTABPOLID Number of the curve polynomials used by
the curve table with number n
Parameter n
CTABSEG Number of curve segments already used
in the memory
memType
CTABSEGID Number of the curve segments used by
the curve table with number n
Parameter n
CTABSEV Returns the final value of the following axis
of a segment of the curve table
Segment is
determined by
LW.
R10 = CTABSEV(LW,
n, degree, Faxis, Laxis)
CTABSSV Returns the initial value of the following
axis of a segment of the curve table
Segment is
determined by
LW.
R10 = CTABSSV(LW,
n, degree, Faxis, Laxis)
CTABTEP Returns the value of the leading axis at
curve table end.
Master value at
end of curve
table
R10 = CTABTEP(n,
degree, Laxis)
CTABTEV Returns the value of the the following axis
at curve table end
Following value
at end of curve
table.
R10 = CTABTEV(n,
degree, Faxis)
CTABTMAX Returns the maximum value of the
following axis of the curve table
Following value
of the curve
table.
R10 = CTABTMAX(n,
Faxis)
CTABTMIN Returns the minimum value of the
following axis of the curve table
Following value
of the curve
table.
R10 = CTABTMIN(n,
Faxis)
CTABTSP Returns the value of the leading axis at
curve table start
Master value at
start of curve
table.
R10 = CTABTSP(n,
degree, Laxis)
CTABTSV Returns the value of the following axis at
curve table start
Following value
at start of curve
table.
R10 = CTABTSV(n,
degree, Faxis)
CTABUNLOCK Cancel locking against deletion and
overwriting
Parameters n,
m, and
memType
CTRANS Zero offset for multiple
axes
FRAME Max. 8 axes.
CUT2D
1
2D cutter compensation type 2-
dimensional
m 22
CUT2DF 2D cutter compensation type 2-
dimensional frame. The cutter
compensation acts relative to the current
frame (inclined plane).
m 22
CUT3DC
5
3D cutter compensation type 3-
dimensional circumference milling
m 22
CUT3DCC
5
3D cutter compensation type 3-
dimensional circumference milling with
limitation surfaces
m 22