Siemens SINUMERIK 840Di sl - Page 441

Tables
12.1 List of statements
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
441
Name Meaning Value Description,
comment
Syntax m/s
3
Group
2
DELT
Delete tool Duplo number
can be omitted.
DIACYCOFA Axis-specific, modal diametral
programming: OFF in cycles
Radius
programming,
last active
G code
DIACYCOFA[axis] m
DIAM90 Diameter programming for G90, radius
programming for G91
m 29
DIAM90A Axis-specific, modal diameter
programming for G90 and AC, radius
programming for G91 and IC
m
DIAMCHAN Acceptance of all axes from MD axis
functions in diameter-programming
channel status
Accept
diameter
programming
from MD.
DIAMCHAN
DIAMCHANA Acceptance of the diameter-programming
channel status
Channel status DIAMCHANA[axis]
DIAMCYCOF Radius programming for G90/G91: ON.
The G code of this group that was last
active remains active for display
Radius
programming,
last active
G code
m 29
DIAMOF
1
Diameter programming: OFF
(Diameter programming OFF)
For default setting, see machine
manufacturer.
Radius
programming
for G90/G91
m 29
DIAMOFA Axis-specific, modal diameter
programming: ON
For default setting, see machine
manufacturer.
Radius progr.
for G90/G91
and AC, IC.
DIAMOFA[axis] m
DIAMON Diameter programming: ON
(Diameter programming ON)
Diameter
programming
for G90/G91.
m 29
DIAMONA Axis-specific, modal diameter
programming: ON
For activation, see machine manufacturer.
Diameter
programming
for G90/G91
and AC, IC.
DIAMONA[axis] m
DIC Relative, non-modal, axis-specific
diameter programming
Diameter
programming.
DIC(50) s
DILF Length for lift fast m
DISABLE Interrupt OFF
DISC Transition circle overshoot
- radius compensation
0, ..., 100 m
DISPLOF Suppress current block display
(display OFF)
DISPR Distance for repositioning Real, without
sign
s