Tables
12.1 List of statements
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
443
Name Meaning Value Description,
comment
Syntax m/s
3
Group
2
ENABLE
Interrupt ON
ENAT
1, 7
Natural transition to next traversing block
(end natural)
m 20
ENDFOR End line of FOR counter loop
ENDIF End line of IF branch
ENDLOOP End line of endless program loop LOOP
ENDPROC End line of program with start line PROC
ENDWHILE End line of WHILE loop
ETAN Tangential transition to next traversing
block at spline end (end tangential)
m 20
EVERY Execute synchronized action if condition
changes from FALSE to TRUE
EXECSTRING Transfer of a string variable with the part
program line to run
Indirect part
program line
EXECSTRING(MFCT1
<< M4711)
EXECTAB Execute an element from a motion table
(execute table)
EXECUTE Program execution ON Return from the
reference-point
edit mode or
after building a
protection area
to normal
program
processing.
EXP Exponential function (e
x
) real
EXTCALL Execute external subprogram Reload program
from HMI in
"Execution from
external
source" mode.
EXTERN Broadcast a subprogram with parameter
passing
F Feed value
(in conjunction with G4
the dwell time is also
programmed in F)
0.001, ...,
99999.999
Path veloc.
of a
tool/workpiece;
unit: mm/min or
mm/revolution
depending on
G94 or G95
F=100 G1 ...
To Next Page
Loading...
