Tables
12.1 List of statements
Fundamentals
446 Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Name Meaning Value Description,
comment
Syntax m/s
3
Group
2
FRAME Data type to define the coordinate system Contains for
each geometry
axis:
Offset, rotation,
angle of shear,
scaling,
mirroring;
For each
special axis:
offset, scaling,
mirroring
FRC Feed for radius and
chamfer
s
FRCM Feed for radius and
chamfer, modal
m
FTOC Change fine tool offset As a function of
a 3rd-order
polynomial
defined with
FCTDEF.
FTOCOF
1,6
Online fine tool offset OFF m 33
FTOCON
6
Online fine tool offset ON m 33
FXS Travel to fixed stop ON Integer,
without sign
1 = select,
0 = deselect
m
FXST Torque limit for travel to
fixed stop
(fixed stop torque)
% parameter
optional
m
FXSW Monitoring window for
travel to fixed stop
(fixed stop window)
mm, inch or
degrees
parameter
optional
G G function (preparatory
function)
The G functions are
divided into G groups.
Only one G function of a
group can be
programmed in a block.
A G function can be either
modal (until it is canceled
by another function of the
same group) or only
effective for the block in
which it is programmed
(non-modal).
Only
specified,
integer values
G...
To Next Page
Loading...
