Tables
12.3 List of G functions/preparatory functions
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
487
Group 29: Radius - diameter
Name No. Meaning X m/n SAG MM
DIAMOF 1. Diameter programming OFF: Diameter programming OFF; radius
programming for G90/G91
m Def.
DIAMON 2. Diameter programming ON: Diameter programming ON for G90/G91 m
DIAM90 3. Diameter programming G90: Diameter programming for G90; radius
programming for G91
m
DIAMCYCOF 4. Diameter programming OFF: Radius programming for G90/G91: ON. The
G-code of this group that was last active remains active for display
m
Group 30: Compressor ON/OFF
Name No. Meaning X m/n SAG MM
COMPOF # 1. Compressor OFF m Def.
COMPON # 2. Compressor ON m
COMPCURV
#
3. Compressor ON: Polynomials with constant curvature m
COMPCAD # 4. Compressor ON: Optimized surface quality CAD program m
Group 31: OEM - G group
Name No. Meaning X m/n SAG MM
G810 # 1. OEM - G function Def.
G811 # 2. OEM - G function
G812 # 3. OEM - G function
G813 # 4. OEM - G function
G814 # 5. OEM - G function
G815 # 6. OEM - G function
G816 # 7. OEM - G function
G817 # 8. OEM - G function
G818 # 9. OEM - G function
G819 # 10. OEM - G function
Two G groups are reserved for the OEM. This enables the OEM to program functions that
can be customized.
# The keyword is not valid for SINUMERIK 810D/NCU571.
Group 32: OEM - G group
Name No. Meaning X m/n SAG MM
G820 # 1. OEM - G function Def.
G821 # 2. OEM - G function
G822 # 3. OEM - G function
G823 # 4. OEM - G function
To Next Page
Loading...
