Control During Operation
7-357SA522 Manual
C53000-G1176-C119-2
From PC with
DIGSI
®
4
If the 2QOLQH directory in DIGSI
®
4 is opened with a double click, the operation func-
tions of the device appear in the left hand side of the window.
By clicking on the 7HVWIXQFWLRQ, a list of the available functions appears on the
right hand side of the display (Figure 7-39).
By a double click on the &LUFXLWEUHDNHUWHVW, a dialogue window is opened in
which the desired test sequence can be marked for selection.
Following a double click, a prompt for the entry of password No. 4 (for test and diag-
nosis) appears.
After entry of the password and confirmation with 2N the test sequence is executed.
In the spontaneous event window, the execution of the test is displayed with the cor-
responding control responses and messages.
Figure 7-39 Circuit breaker trip test in DIGSI
®
4
:
To Next Page
Loading...
