Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
69
Procedure for installing the HMI connecting cable
Ⴠ Use the opening to the cable duct to install the cable in the 3RW52 soft starter.
Ⴠ It is possible to route the cable up or down in the cable duct.
Make sure that you install the cable in accordance with EMC requirements. For example,
install data cables separately from the motor cable. Connect both sides of shielded
cables over a large surface area.
To Next Page
Loading...
