Parameter assignment
6.1 Setting elements on the 3RW52 soft starter
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
99
Tip
The displays on the setting elements are approximate values subject to manufacturing
tolerances. To make detailed settings, use a 3RW5 HMI (accessory).
Display of the parameter value in the 3RW5 HMI (accessory)
Ⴠ 3RW5 HMI Standard
While you are setting the parameters on the setting elements, the current value is shown
and cyclically updated on the display of the 3RW5 HMI Standard.
Ⴠ 3RW5 HMI High Feature
While you are setting the parameters on the setting elements, the current value is shown
and cyclically updated on the display of the 3RW5 HMI High Feature in the
"Parameters > Soft Starter > Parameter list" menu.
Display of the parameter values in SIRIUS Soft Starter ES (TIA Portal)
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Parameters" > Window "Work area" > "Soft Starter > Parameter list"
To Next Page
Loading...
