SISTORE MX RemoteView
126
Siemens Building Technologies
Fire Safety & Security Products 01.2008
Alarm connection in multi-server mode
In the event of an alarm, the server on which the alarm occurred will establish a
connection to the RemoteView.
If one or several other servers are already connected to the RemoteView client, the
user will be asked whether he wants to accept the incoming alarm connection.
z In case the user refuses to accept the alarm connection, the server will
automatically establish a connection with another RemoteView client, provided that
the server has been configured accordingly.
z The main disadvantage of multi-server operation is the high network load when
several RemoteView clients are simultaneously connected to the same servers.
z Furthermore, there are various limitations in multi-server mode:
z Remote configuration is only possible when the RemoteView is connected to
one server only.
z Simultaneous connection to 10 servers max.
z The logbook cannot be opened. It is only possible to open the logbook of one
server. The server can be selected from a combo box which contains the names
or IP addresses of all the servers that are currently connected.
z All delete functions are disabled
z CDM search and cash box search are disabled
To Next Page
Loading...
Need help?
General
