Siemens SITRANS FS230 - Connecting wall mount enclosure; Preparing wall mount enclosure connections

4.7 Connecting wall mount enclosure
4.7.1 Preparing wall mount enclosure connections
1. Remove blind plugs where required.

① Power supply connection
② Input/output connection (channels 2 to 4)
③ Modbus connection
2. Loosen spring screws on enclosure lid.
3. Open enclosure lid. A nameplate showing the con󹪝guration is placed on the inside of the
transmitter enclosure lid.
Connecting
4.7Connecting wall mount enclosure
SITRANS FS130 & FS230
66 Compact Operating Instructions, 12/2023, A5E38755607-AF