Siemens SITRANS FS230 - Designated Use

Manual
edition
Remarks Device revision Compatible version of device integration package
06/2021 Industrial enclo‐
sure support
HART/Modbus
FW: 1.04.00 for gas
FW: 1.03.00 for liquid (clamp-
on and inline)
HW: 002 and 003
Device revision 5 or later
SIMATIC PDM V8.2 or later EDD: 1.04.00
AMS Device Manager 12.0 or
later
SITRANS DTM V4.1
Field communicator V3.8
12/2019 Gas installations
support
HART/Modbus
FW: 1.04.00 for gas
FW: 1.03.00 for liquid (clamp-
on and inline)
HW: 002 and 003
Device revision 5 or later
SIMATIC PDM V8.2 or later EDD: 1.04.00
AMS Device Manager 12.0 or
later
SITRANS DTM V4.1
Field communicator V3.8
08/2018 Defect solved HART/Modbus
FW: 1.00.01
HW: 002
Device revision 4 or later
SIMATIC PDM V8.2 or later EDD: 1.02.00
AMS Device Manager 12.0 or
later
SITRANS DTM V4.1
Field communicator V3.8
08/2017 Updated manuals HART/Modbus
FW: 1.00.00
HW: 002
Device revision 3 or later
SIMATIC PDM V8.2 or later EDD: 1.00.00 or 1.01.00
AMS Device Manager 12.0 or
later
SITRANS DTM V4.1
Field communicator V3.8
02/2017

First edition
Liquid installa‐
tions support
HART/Modbus
FW: 1.00.00
HW: 002
Device revision 3 or later
SIMATIC PDM V8.2 or later EDD: 1.00.00 or 1.01.00
AMS Device Manager 12.0 or
later
SITRANS DTM V4.1
Field communicator V3.8
1.3 Designated use
Use the device to measure process medium in accordance with the information in the operating
instructions.
NOTICE
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
Introduction
1.3Designated use
SITRANS FS130 & FS230
8 Compact Operating Instructions, 12/2023, A5E38755607-AF