3.6 Installation Instructions
3.6.1 Industrial enclosure
3.6.1.1 Mounting on wall
1. Prepare holes with aid of the mounting bracket, see Mounting bracket dimensions
(Page114).
2. Fasten mounting bracket with black cushion pad to wall (torque 10 Nm).
3.6.1.2 Mounting on pipe
1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and
supplied pipe adaptor.
Note
U-bolts and other miscellaneous hardware are not supplied with the owmeter.
2. Tighten nuts (torque: 10 Nm).
Installing/mounting
3.6Installation Instructions
SITRANS FS130 & FS230
Compact Operating Instructions, 12/2023, A5E38755607-AF 25
To Next Page
Loading...
