4.7.5 Connecting HART
Note
4 to 20 mA output
It is not required to use shielded cables for the pure 4 to 20 mA current output.
Note
HART communication
It is recommended by the FieldComm Group (FCG) to use shielded cables for the HART
communication.
Procedure
1. Open enclosure lid.
2. Remove blind plug and t cable gland.
3. Push cable through open gland and cable path.
4. Restore ferrule and tighten cap to hold cable in place.
Connecting
4.7Connecting wall mount enclosure
SITRANS FS130 & FS230
74 Compact Operating Instructions, 12/2023, A5E38755607-AF
To Next Page
Loading...
