3.6.1.3 Mounting the transmitter
M12 digital cable connection
1. Remove locking cap from mounting bracket.
2. Mount transmitter on mounting bracket taking care that the utes on the mating faces are
correctly engaged.
3. Firmly tighten locking cap on mounting bracket (torque: 25 Nm).
3.6.1.4 Turning the transmitter
Horizontal rotation
1. Unscrew cap from lock screw.
2. Loosen lock screw at transmitter pedestal using 5 mm Allen key.
3. Carefully rotate transmitter into desired position.
4. Firmly tighten lock screw (torque: 10 Nm).
5. Replace cap onto lock screw (torque: 10 Nm).
Installing/mounting
3.6Installation Instructions
SITRANS FS130 & FS230
26 Compact Operating Instructions, 12/2023, A5E38755607-AF
To Next Page
Loading...
