Page 12 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS A5E33329501
mmmmm
Installing and Mounting
Please note:
• Recommended fastener size: M8 or 5/16 "
screw with washer of maximum 17 mm or
5/8 " outside diameter
• Recommended mounting: mount directly
to wall. If alternate mounting surface is
used, it MUST be able to support four
times the weight of the device.
Remote mounted lid
For a more detailed dimension drawing, see
SITRANS LUT400 Dimensions
on page 255
and
Cutout Dimensions (for Remote Panel Mount)
on page 256.
mounting screw holes on back plate
gasket
remote display lid
SITRANS LUT400
extension cable
4 panel mount
fasteners provided
To Next Page
Loading...
