A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 229
mmmmm
Maintenance
Decontamination Declaration
Any device returned to Siemens for repair must be accompanied by a Declaration of
Decontamination. With this declaration you certify
that the returned products/spare parts
have been carefully cleaned and are free from any residues
.
If the device has been operated together with toxic, caustic, flammable or water-
damaging products, clean the device before return by rinsing or neutralizing. Ensure that
all cavities are free from dangerous substances. Then, double-check the device to ensure
the cleaning is completed.
Siemens will not service a device or spare part unless the declaration of decontamination
confirms proper decontamination of the device or spare part.
Shipments received without a declaration of decontamination will be cleaned
professionally at your expense before further processing.
Decontamination Declaration form can be found on the internet at
www.siemens.com/processinstrumentation
, under Service – Decontamination
Declaration.
To Next Page
Loading...
