Siemens SITRANS LUT400 Series - PROGRAM Mode Display; Key Functions in Measurement Mode; Programming SITRANS LUT400

A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 35
mmmmm
Commissioning
PROGRAM mode display
Navigation view
• A visible menu bar
indicates the menu list is
too long to display all
items.
• The depth of the item
band on the menu bar
indicates the length of the
menu list: a deeper band
indicates fewer items.
• The position of the item band indicates the approximate position of the current item in the
list. A band filled halfway down the menu bar indicates the current item is halfway down
the list.
Key functions in Measurement mode
Programming SITRANS LUT400
Change parameter settings and set operating conditions to suit your specific application.
(For remote operation, see Operation via SIMATIC PDM 6 (HART) on page 127 or
Operation via AMS Device Manager (HART) on page 131.)
Key Function Result
RIGHT arrow
opens PROGRAM mode.
Opens the top level menu.
UP or DOWN arrow
toggles between PV and SV.
LCD displays primary or secondary value.
Notes:
• To enter Program mode using the device local push buttons, press . Press to
return to Measurement mode.
• While the device is in Program mode, the output remains active and continues to
respond to changes in the device.
TRANSDUCER
2.1.6
NO TRANSDUCER
XPS-10
XPS-15
XCT-8
XCT-12
XPS-30
XRS-5
parameter
number
current item
current menu/
parameter
name
menu bar
item band
SENSOR
2.1.6
UNITS
SENSOR MODE SECONDARY
TRANSDUCER
FREQUENCY
XRS-5
SENSOR MODE
TRANSDUCER
2.1.6
NO TRANSDUCER
XPS-10
XPS-15
XCT-8
XCT-12
XPS-30
XRS-5
parameter
value/selection
parameter
name
parameter
number
Parameter view
Edit view
menu in
which
parameter
is located