Siemens SITRANS LUT400 Series - Page 349

Page 36 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS 7ML1998MV01
mmmmm
Commissioning
Parameter menus
Parameters are identified by name and organized into function groups, then arranged in a
5-level menu structure, as in the example below. (For full menu see
LCD Menu Structure
on page 277.)
1. Enter PROGRAM mode
Using local push buttons:
• RIGHT arrow activates PROGRAM mode and opens menu level 1.
2. Navigating: key functions in Navigation view
Note: For the complete list of parameters with instructions, see Parameter reference
(LUI)
on page 137 .
Notes:
• In Navigation view, ARROW keys move to the next menu item in the direction of the
arrow.
• Press and hold any arrow key to scroll through a list of options or menus (in the
direction of the arrow).
Key Name Menu level Function
UP or DOWN
arrow
menu or parameter
Scroll to previous or next menu or
parameter.
RIGHT arrow
menu
Go to first parameter in the selected
menu, or open next menu.
parameter Open Edit mode.
LEFT arrow
menu or parameter Open parent menu.
1. WIZARDS
2. SETUP
2.1 SENSOR
......
2.7 PUMPS
2.7.1 BASIC SETUP
2.7.2 MODIFIERS
2.7.2.1 WALL CLING REDUCTION
2.7.2.1.1 ENABLE