Siemens SITRANS LUT400 Series - Operation Via Web Browser (USB); Features and Functions; Startup and Configuration

A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 129
mmmmm
Operation - Browser
Operation via Web Browser (USB)
Features and Functions
The web browser interface in SITRANS LUT400, designed to work with Windows XP, makes
monitoring and adjustments easy. Internet Explorer installed on a computer can be used to
configure the SITRANS LUT400, and the Web Server
Abyss is supplied for your convenience.
The web browser is available in English only.
SITRANS LUT400 parameters, organized into six main function groups, allow you to configure
and monitor the device:
• Identification
• Setup
• Maintenance and Diagnostics
• Communication
•Security
•Language
Startup and Configuration
To start up the SITRANS LUT400 using the Web Browser, you must first install the USB driver
and web browser interface. On the small DVD shipped with the device you will find the driver
and installation software
1
. Once installed, the communication port (COMPORT) must be set,
then you can configure the device via the browser menu parameters.
The menu structure for the web browser interface is almost identical to that of the LCD.
See
Browser Menu Parameter Function Groups in the LUT400 Communications manual
2
for a
complete list of parameters that can be configured via the web browser.
For installation instructions and details on how to configure the device via the Web Browser,
refer to the LUT400 Communications manual
1
.
1.
Also available from the product page of our website. Go to:
www.siemens.com/sitransLUT400
and click on Support>Software Downloads.
2.
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01).