A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 19
mmmmm
Connecting
Connecting
Safety notes for connection
• Verify that all system components are installed in accordance with instructions.
• Connect all cable shields to the LUT400 shield terminals (denoted on device with
symbol ). To avoid differential ground potentials ensure cable shields are
properly connected to ground.
• Keep exposed conductors on shielded cables as short as possible to reduce noise
on the line caused by stray transmissions and noise pickup.
Siemens
Transducer
HART FC375/475 or a computer running
SIMATIC PDM, AMS Device Manager,
FDT, or a web browser
Customer Alarm,
Pump, or Control
Device
Siemens TS-3
Temperature Sensor
Customer Device with
Digital Output
Display, PLC, Chart recorder, or other
Control Device
SITRANS LUT400
To Next Page
Loading...
