Siemens SITRANS LUT400 Series - Device Status Icons

Page 232 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS A5E33329501
mmmmm
Troubleshooting
Device Status Icons
LUI
Icon
PDM
Icon
Priority
Level
a
Meaning
1
• Maintenance alarm
• Measurement values are not valid
2
• Maintenance warning: maintenance demanded immediately
• Measured signal still valid
3
• Maintenance required
• Measured signal still valid
1
• Process value has reached an alarm limit
2
• Process value has reached a warning limit
3
• Process value has reached a tolerance limit
1
• Configuration error
• Device will not work because one or more parameters/compo-
nents is incorrectly configured
2
• Configuration warning
• Device can work but one or more parameters/components is
incorrectly configured
3
• Configuration changed
• Device parameterization not consistent with parameterization
in project. Look for info text.
1
• Manual operation (local override)
• Communication is good; device is in manual mode.
2
• Simulation or substitute value
• Communication is good; device is in simulation mode or works
with substitute values.
3
• Out of operation
• Communication is good; device is out of action.
(red)
(yellow)
(green)