A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 51
mmmmm
Commissioning
PMD Dimensions
Notes:
• For each PMD excluding
Exponential Devices
, and
Other
, you must enter up to
four dimensions.
• In the wizard, you will be prompted for each dimension required for the PMD
selected, and the respective PMD dimension name will be displayed.
PMD selected Wizard dimension name (parameter menu reference)
Rectangular Flume BS-3680
APPROACH WIDTH B (
2.15.4.5. OCM Dimension 1
)
THROAT WIDTH B (
2.15.4.6. OCM Dimension 2
)
HUMP HEIGHT P (
2.15.4.7. OCM Dimension 3
)
THROAT LENGTH L (
2.15.4.8. OCM Dimension 4
)
Round Nose Horizontal Crest Weir BS-3680
CREST WIDTH B (
2.15.4.5. OCM Dimension 1
)
CREST HEIGHT P (
2.15.4.6. OCM Dimension 2
)
CREST LENGTH L (
2.15.4.7. OCM Dimension 3
)
Trapezoidal Flume BS-3680
APPROACH WIDTH B (
2.15.4.5. OCM Dimension 1
)
THROAT WIDTH B (
2.15.4.6. OCM Dimension 2
)
HUMP HEIGHT P (
2.15.4.7. OCM Dimension 3
)
THROAT LENGTH L (
2.15.4.8. OCM Dimension 4
)
U-Flume BS-3680
APPROACH DIAMETER DA (
2.15.4.5. OCM Dimension 1
)
THROAT DIAMETER D (
2.15.4.6. OCM Dimension 2
)
HUMP HEIGHT P (
2.15.4.7. OCM Dimension 3
)
THROAT LENGTH L (
2.15.4.8. OCM Dimension 4
)
Finite Crest Weir BS-3680
CREST WIDTH B (
2.15.4.5. OCM Dimension 1
)
CREST HEIGHT P (
2.15.4.6. OCM Dimension 2
)
CREST LENGTH L (
2.15.4.7. OCM Dimension 3
)
Thin Plate Rectangular Weir BS-3680
APPROACH WIDTH B (
2.15.4.5. OCM Dimension 1
)
CREST WIDTH B (
2.15.4.6. OCM Dimension 2
)
CREST HEIGHT P (
2.15.4.7. OCM Dimension 3
)
Rectangular Weir Contracted
CREST WIDTH B (
2.15.4.5. OCM Dimension 1
)
Round Pipe
PIPE INSIDE DIAMETER D (
2.15.4.5. OCM Dimension 1
)
To Next Page
Loading...
