Siemens SIWAREX FTA - Page 142

Commands
SIWAREX FTA
6-130
Code
Command explanation
Executable
in following
operating
states
Log commands
31
Output log text 1
Log output with text layout 1.
No weighing
cycle
32
Output log text 2
Log output with text layout 2.
No weighing
cycle
33
Output log text 3
Log output with text layout 3.
No weighing
cycle
34
Output log text 4
Log output with text layout 4.
No weighing
cycle
35
Repeat last logging procedure
The last log output is repeated.
Not in service.
Digital load cell
40
Send digital load cell On
Output instruction to digital load cell for sending the
weight value
No weighing
cycle
41
Send digital load cell Off
Instruction to digital load cell for ending the sending
of the weight value
No weighing
cycle
Micro Memory Commands
70
Start recording/trace
The recording (trace function) should start
Not in service.
71
End recording/trace
The activated recording (trace function) is ended.
Not in service.
72
Delete logs in MMC
The logs stored in the Micro Memory Card are
deleted.
Service
operation