GB│IE │ 11 ■
SBB 850 B1
Troubleshooting recipes
Why does my bread sometimes have a little fl our
on the side crust?
Your dough may be too dry. Next time, be espe-
cially careful when measuring the ingredients. Add
up to 1 tbsp. of extra liquid.
Why do the ingredients have to be added in a
certain order?
This achieves the best results for your dough. The
timer function prevents the yeast from mixing with
the liquid before the dough is stirred.
Why is the dough only partially kneaded?
Check whether the kneading hook and the baking
mould are properly fi tted. Also check the consist-
ency of the dough and add ½ to 1 tbsp. liquid or
fl our after kneading (repeat if necessary).
With baking mixes The quantity of the ready-made
baking mix and the ingredients have not been
adapted for the capacity of the baking mould.
Decrease the quantity of ingredients.
Why has the bread not risen?
The yeast you have added was too old, or no
yeast was added.
When did you add nuts and fruit to the dough?
You will hear a beep when it is time to add the
ingredients. If you add these ingredients to the
dough at the very beginning, the nuts or fruit could
be crushed during the kneading process.
The baked bread is too moist.
Check the dough consistency after about 5 mins of
kneading and add a little extra fl our if necessary.
There are bubbles on the surface of the bread. You may have used too much yeast.
The bread rises and then collapses.
Possibly the bread has risen too quickly. To avoid
this, reduce the amount of water and/or increase
the amount of salt and/or the amount of yeast.
Can I use other recipes?
You can use other recipes, but take the quantities
involved into account. Get to know your appliance
and practice with the supplied recipes before you
try out your own recipes.
Never exceed the max. quantity of 700 g fl our.
When adapting your recipes, use the quantities in
the recipes provided as an orientation aid.
RH_274313_SBB850B1_LB3.indb 11 19.02.16 14:12
To Next Page
Loading...
