Simplex 4010ES User Manual

3-1
Chapter 3
Trouble Conditions
Introduction A Trouble message is used to indicate that the FACP is impaired, for example, due to an open circuit,
short circuit, ground fault, etc.
This chapter describes using the Operator Interface Panel keys to investigate the details of the trouble
condition.
In this Chapter Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Overview 3-2
Acknowledging Troubles 3-4
If the Trouble Doesn’t Clear 3-6

Simplex 4010ES Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Operating Temperature	32°F to 120°F (0°C to 49°C)
Power Supply	120V AC or 240V AC
Zones	10
Communication Ports	RS-232, Ethernet
Signaling Line Circuits (SLCs)	2
Notification Appliance Circuits (NACs)	4
Max Notification Appliances	Varies based on NAC configuration and power supply
Communication Options	Cellular, Ethernet
Weight	30 lbs
Humidity Range	Up to 93% non-condensing
Certifications	UL, FM, CSFM, MEA
Network Capability	Yes