Simplex 4010ES User Manual

5-3
Selecting Points from the Menu
Procedure 1. Press the Menu key to enter the panels’s menu system.
2. Press the Next key until the alphanumeric display reads as follows:
3. Press ENTER. The display reads as follows:
4. Press the Next key to scroll through the categories of points until the appropriate category is
shown. Press the ENTER key. The first point in the selected category appears. In the example
below, the point shown is the first one in the monitor zone category.
5. Press the Next key to scroll through the list of points in the category. When the point that you
want to select is displayed, press ENTER.

Simplex 4010ES Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Operating Temperature	32°F to 120°F (0°C to 49°C)
Power Supply	120V AC or 240V AC
Zones	10
Communication Ports	RS-232, Ethernet
Signaling Line Circuits (SLCs)	2
Notification Appliance Circuits (NACs)	4
Max Notification Appliances	Varies based on NAC configuration and power supply
Communication Options	Cellular, Ethernet
Weight	30 lbs
Humidity Range	Up to 93% non-condensing
Certifications	UL, FM, CSFM, MEA
Network Capability	Yes