Simplex 4010ES User Manual

7-1
Chapter 7
System Test Procedures
Introduction This section describes performing the system tests that can be performed from the front panel of the
4010ES.
In this Chapter Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Lamp Test / Tone Alert Test 7-2
WalkTest Overview 7-3
Setting WalkTest Options 7-4
TrueNAC Voltage Drop Test 7-5
Disable IDNET CO Algorithms 7-11

Simplex 4010ES Specifications

General

Control Panel Type	Addressable Fire Alarm Control Panel
Display	LCD
Operating Temperature	32°F to 120°F (0°C to 49°C)
Power Supply	120V AC or 240V AC
Zones	10
Communication Ports	RS-232, Ethernet
Signaling Line Circuits (SLCs)	2
Notification Appliance Circuits (NACs)	4
Max Notification Appliances	Varies based on NAC configuration and power supply
Communication Options	Cellular, Ethernet
Weight	30 lbs
Humidity Range	Up to 93% non-condensing
Certifications	UL, FM, CSFM, MEA
Network Capability	Yes