7-12
Disable IDNET CO Algorithms, Continued
Overview
Figure 7-2. Simultaneous Testing of Multiple Sensor Technologies
Disable IDNET CO
Algorithms without
WalkTest Enabled
With the WalkTest option disabled, the devices will bring in actual alarms at the panel unless specific
custom control is written to prevent this.
Disable IDNET CO
Algorithms with
WalkTest Enabled
With the WalkTest option enabled, the devices won't go into alarm at the panel. Instead the device that
went over threshold will be coded out and a print message will be generated to show that it passed a
functional test.
To Next Page
Loading...
