4-3
Figure 4-1. 4100-6014 Network Interface Card
{xe "network interface card (NIC): LEDS"}
The 4100-6014 NIC has the following LEDs:
LED1 (yellow). Illuminates when:
The host 4100 requests it to illuminate.
A transmission fails.
The NIC is off-line with the 4100 host.
The NIC needs to be configured.
LED2 (red). Illuminates when a data ‘0’ is received at the right port.
LED3 (green). Illuminates when a data ‘0’ is transmitted at the right port.
LED4 (red). Illuminates when a data ‘0’ is received at the left port.
LED5 (green). Illuminates when a data ‘0’ is transmitted at the left port.
Continued on next page
Introduction to the 4100 Network Interface Card (NIC), Continued
Network Interface
Card
NIC Card LED
Indications
To Next Page
Loading...
