Simplex 4100ESi - 426: APS;LPS NAC Connection to Strobe Driver

74
Environmental specifications
Operating 0°C to +45°C
-5°C to +55°C
Operating humidity.
Up to 93% RH, non-condensing.
IP Rating.
All cabinets rated to IP30, except SZxxxx IP65 cabinets (special
order).
Power supply
APS power
supply
ME0504.
LPS power supply
ME0508.
Input power.
195-264VAC 50-60Hz.
2.4A
Total power supply
output rating.
10A maximum @
nominal 27.3VDC (7A
long term as per
AS7240.4 rating
method).
Output switches to
battery backup during
mains AC
failure or
brownout conditions.
Load current is sum
of
Card power, Signal
power, NAC power,
switched
output, ASE
and battery charging.
NAC outputs.
3 x outputs rated at 2A
maximum @ nominal
27.3VDC.
Switched power
outputs.
3 x 2A maximum @
nominal 27.3VDC
Battery Capacity
Range.
6.2Ah to 75Ah; 1.8A
or 3.5A charging
current.
Charger
characteristics
and performance.
Temperature
compensated, dual
rate, recharges
depleted batteries
within 24 hours per
AS 7240.4 and
AS1670.1.
VIGILANT
expansion power
supply
4100-ME0470.
Input Power.
195-264VAC
50-60Hz.
1.2A.
Total Power
Supply Output
Rating.
5A max. @ nominal
27.3VDC.
Output switches to its
own (optional) battery
backup during mains
AC failure or brownout
conditions.
Compatible actuating devices, cards, and peripherals are listed in Appendix C and Appendix F.
Panel power loads and PSU/battery capacity requirements are calculated using the 4100Cost tool.