18 - 7
18 Mower Deck Service
48" Mower Roller Bar Group (SN 1 to 59999)
REF. QTY. DESCRIPTION
1 1 ROCKER SHAFT ASSEMBLY
2 2 CARRIAGE BOLT, 3/8-16 x 1-3/4
3 2 WASHER, 3/8
4 12 CARRIAGE BOLT, 3/8-16 x 1
5 12 LOCKWASHER, 3/8
6 12 NUT, Hex, Full, 3/8-16
7 4 WASHER, Plain, 3/8
8 1 BRACKET, Roller, RH
9 2 SLIDE
10 2 WASHER, 1/2 x 1-1/4
11 2 BOLT, Shoulder
12 2 NUT, Adjuster, Eccentric
13 1 BAR ASSEMBLY, Roller, LH
14 2 SET SCREW, Sqr Hd, 5/16-18 x 1/2
15 1 SHAFT, Roller
16 14 WASHER, 1.0
17 7 ROLLER ASSEMBLY
18 14 BUSHING, Roller
19 7 SPACER, Short
20 1 PIN, Cotter
21 1 E-RING, 1/2
22 1 WASHER, Flat, 1/2 x 7/8
23 1 WHEEL, Slide
24 1 BAR ASSEMBLY, Wheel
25 1 HAIRPIN
26 1 HITCH PIN, 3/8
27 1 CAPSCREW, Hex Hd, 3/8-16 x 1
28 1 NUT, Hex, Nylon Lock, 3/8-16
29 1 BAR ASSEMBLY, Roller, RH
30 1 BRACKET, Roller, LH
31 1 DECAL, Cutting Height Indicator
32 1 PLATE, Height Indicator
33 1 CAPSCREW, Hex Hd, Taptite, 1/4-20 x 3/8
34 1 ROD, Indicator
35 1 CAPSCREW, Hex Hd, Taptite, 5/16-18 x 1/2
36 2 CARRIAGE BOLT, 3/8-16 x 2-1/4
37 2 SPACER
38 2 STRAP
48" Mower Roller Bar Group (SN 1 to 59999)
To Next Page
Loading...
