56 | Main menu
Alarms
The AP28 may be set up to sound an alarm if vessel or
environmental parameters exceeds preferred values.
The alarm monitoring is disabled by setting the value to
Off.
Shallow water
The setting of the alarm is global and can be made on
any Simrad unit that has this function implemented.
Range Change per step
Default Units
Off – 320 ft
(Off – 100 m)
1.6 – 5: 0.1 ft
5 – 10: 0.5 ft
10 – 50: 1 ft
50 – 100: 5 ft
100 – 320: 10 ft
(0.5 – 5: 0.1 m)
(5 – 10: 0.5 m)
(10 – 50: 1 m)
(50 – 100: 5 m)
Off ft, m
Wind shift
The wind shift alarm monitors the wind angle. The
reference angle is set when the alarm is turned on and
when the product is turned on. The reference wind angle
is reset to present wind angle when the commanded (set)
wind angle is changed on the autopilot and when a wind
shift alarm is acknowledged.
The wind shift reading is presented on the ‘Wind shift’-
data page and shows the change of wind angle with
reference to the (geographic) wind direction.
To Next Page
Loading...
Need help?
General
