Setup at installation | 69
4 Setup at installation
4.1 First time turn on
Before attempting to turn on the AP28 and perform an
Installation Setup, the hardware installation and electrical
connections must be completed in accordance with the
installation instructions.
When the AP28 is powered on for the first time, the
instrument will run through an automatic start-up
sequence presenting:
- Product name, software version, release date
- Language selection
- Automatic data source selection
PWR
The display will show which items
of the installation setup that needs
to be done and those already done.
Press the
softkey to continue
with the installation setup according
to the next chapters.
To Next Page
Loading...
Need help?
General
