Simrad AP28 - Commissioning and Dockside Settings; Boat Type Configuration

Setup at installation | 71
Commissioning
Dockside settings
If the autopilot has no rudder feedback unit installed refer
to Virtual Rudder Feedback on page 80-83.
The following menu items are accessible and can be set
up in the Dockside menu:
- Boat type
- Rudder feedback
- Virtual feedback
- Drive voltage
- Drive engage
- Rudder test
- Depth calibration
- Steer to wind
- Steer to navigator
Boat type
Type of boat selected will affect the steering parameters,
and the functions available in the autopilot system.
The options are: Sail, Displacement, Outboard and
Planing.