102 | Setup at installation
Instance number
The instance number is used to identify multiple units of
the same model when connected to a SimNet or
NMEA2000 network. The instance number is added to the
product name e.g. AP28-1, AP28-2 for easy identification
of the unit.
Range Step Default value
0 - 20 1 0
4.3 Service Information
Also see Troubleshooting page 109 about SimNet status,
System data and resets.
The main menu includes a
Service item that access several
options to display data used
when testing or troubleshooting
the system.
Demo
The autopilot includes a demo mode useful for
demonstration and on show. All data displayed in the
data pages can be simulated.
To Next Page
Loading...
