66 | Main menu
Range Default Units
1 and 10 1 °
3.3 Remote lock
The "Remote lock" function is a safety feature included in
the AP28 system. It will disable all other control units.
When the "Remote lock" function is in use, no transfer of
command can take place; only the active control unit
stays in command.
The "Remote lock" function is enabled as follows:
On the active control unit a icon will alternate with
the mode index.
The "locked" control units in the system will show:
The Lock function is disengaged by one of the following
actions:
To Next Page
Loading...
