Simrad HH36 User Manual

Simrad - HH36 Installation and Operation Instructions 21
Section 4 - Advanced setup
How to display and navigate menus
1. Hold down CALL/MENU key for more than 1 second to enter the set up menu.
2. Press CH / to scroll up and down the menu until the cursor is positioned at the
desired items. Press ENTER softkey to select the item.
3. Make any changes then press ENTER softkey to conrm changes. Otherwise, press
EXIT softkey to ignore.
4. Press EXIT softkey to go back or exit. Any changes are activated as soon as you
enter/exit the screen.
How to enter Alphanumeric data
Use the CH / key to enter characters.
1. Press to enter and count through numbers and letters, and hold down to select
the desired character.
2. Press to go through letters of the alphabet, and hold down to select the desired
character.
3. Press ENTER to conrm.
The following options are available through MENU:
• ATISMMSI
(EU only)
•ATISSELECT
(EU only)
• WAYPOINT
• BACKLIGHT
• LAMP
• BUDDY LIST
• CONTRAST
• GPS/DATA
• RADIOSETUP
• DSC SETUP
• ATISSETUP
(EU only)
• GETBUDDY)
• TRACK LOG
• ERASE TRACK
• RESET
MENU
• MANUALL/L
• SETUP
• UIC (non EU)
• CHNAME
• RINGVOLUME
• KEY BEEP
• UNITS
• WATCHMODE
(US only)
• WXALERT(US only)
• NMEAOUT
• FAVCHSETUP
(non US)
• USER MMSI
• GROUP SETUP
• INDIV REPLY
• DSCSELECT
• LLREPLY
• AUTO SWITCH
• TESTREPLY
• TIMEOUT

Simrad HH36 Specifications

General

Brand	Simrad
Model	HH36
Category	Radio
Language	English